39 completed projects across South San Francisco and San Francisco and 12 other areas — each one documented with on-site photos and a written report.
1 / 7south san francisco
Dryer Vent Specialists completed a full residential dryer exhaust cleaning and inspection at a South San Francisco home, including installation of a new UL 2158A-rated transition duct to bring the system up to code.
1 / 5San Francisco
Dryer Vent Specialists completed a full residential dryer exhaust cleaning and inspection at a San Francisco home, including installation of a new UL 2158A-rated fire duct and identification of a non-compliant exterior vent hood missing its backdraft damper flap.
1 / 8SAN FRANCISCO
Dryer Vent Specialists completed a full exhaust cleaning and inspection on two residential dryers at a San Francisco home, clearing lint accumulation from both systems and documenting installation conditions including a foil transition duct and fence-mounted terminations.
1 / 7San Carlos
Professional dryer vent cleaning service in San Carlos removed severe lint buildup from 16 feet of ductwork, restoring safe operation and proper airflow.
1 / 8Mountain View
Professional dryer vent cleaning and fire-rated transition duct replacement in Mountain View, improving safety and airflow efficiency.
1 / 3Palo Alto
Professional dryer vent cleaning and inspection completed at a Palo Alto duplex, addressing lint accumulation and non-compliant 1974 termination.
1 / 8Sunnyvale
Professional dryer vent cleaning and safety upgrade in Sunnyvale, replacing non-compliant periscope ducting with fire-rated transition duct.
1 / 8San Francisco
Professional dryer vent cleaning resolved a completely blocked exhaust system in San Francisco, restoring safe airflow and eliminating fire hazards.
1 / 8San Francisco
Complete dryer vent system upgrade in San Francisco replacing prohibited flexible duct with code-compliant rigid metal installation per IRC standards.
1 / 8San Francisco
Complete new dryer exhaust system installation in San Francisco featuring 4" DryerFlex ductwork with professional wall termination and code-compliant mounting.
1 / 8Belmont
Our technician Michael performed a comprehensive dryer vent cleaning and system restoration on a multi-unit apartment building in Belmont, addressing severe lint accumulation and deteriorated…
1 / 4San Mateo
I addressed improper venting by penetrating the exterior wall and installing a wall vent with a 2158a rated transition duct, allowing the dryer to exhaust outside the garage rather than into the…
1 / 8Palo Alto
The customer reported excessive moisture during laundry loads. Upon inspection, the technician found the dryer in poor condition and performed a complete service on both the dryer unit and vent…
1 / 8San Francisco
Our technician performed a comprehensive dryer vent cleaning and inspection on a multi-unit residential building in San Francisco.
1 / 4Los Altos
The lint trap assembly was removed and thoroughly cleaned, including the area beneath the lint tray and fan housing where a significant amount of lint had accumulated.
1 / 5San Mateo
A comprehensive dryer vent cleaning and inspection was performed on this San Mateo single-family home, which featured a roof-mounted exterior vent cap with rigid metal ductwork running through the…
1 / 6San Francisco
I removed the deteriorated foil-flex ductwork at this San Francisco residence due to excessive lint accumulation and airflow restriction, then installed a new 2158a fire-rated transition duct to…
1 / 6Half Moon Bay
The customer's existing dryer exhaust system was found to be improperly installed, with a transition duct running through the wall that had collapsed, preventing the dryer from operating correctly.
1 / 8Los Altos
The customer's dryer vent system was reconfigured to eliminate the unnecessary booster fan. A proper 2158a transition duct was installed, the dryer was thoroughly cleaned, and the system was…
1 / 7San Francisco
Our technician Michael inspected the customer's existing dryer exhaust system and identified multiple issues requiring replacement.
1 / 5San Carlos
This was a job we completed In San Carlos, CA. We serviced this property last year and were back for the annual cleaning.
Menlo Park
I was called out to clean this dryer in a laundromat and man can I tell you that there was a massive amount of lint in the machine right next to the burner tubes.
1 / 8Redwood City
This was a fire/code compliance project we took on recently in San Mateo, CA. The home purchased a new dryer and upon delivery the dryer would not fit correctly into the existing space.
1 / 8San Mateo
This was a fun job that I took on In San Mateo, CA. The customer has an HVAC company install a dryer exhaust system for them and it did not turn out the way it should have in fact the whole setup was…
South San Francisco
I was called out to this customer’s house for a standard residential dryer vent cleaning upon speaking to the homeowner. It turns out the vent has never been cleaned, which is 27 years.
1 / 6San Francisco
I was called out by this customer over concerns of the length of the dryer exhaust system upon inspection. I came up with a solution to dramatically reduce the length of the run.
1 / 4Burlingame
This was a dryer vent that had not been serviced in many years. When I arrive the I found that the pest control company had installed a screen over the termination.
1 / 3San Mateo
Customer called me our for a standard dryer vent cleaning. It turns out they had a booster fan removed and the removal was not correctly. I was able to correctly repair the previous job.
1 / 5San Carlos
I was called out this house because the dryer was not working correctly. Upon inspection a majority if the duct work was incorrect, I wan able to correct the issues and get the dryer working…
1 / 6Hillsborough
I was called out to this home to do a dimple dryer vent cleaning. I turned out that the exhaust system had several issues. 1. the vent was fully clogged 2. the transition duct was damage 3.
1 / 8Hillsborough
I replaced non-code-compliant semi-rigid transition ductwork in the attic with 26-gauge hard pipe, securing it properly to the framing.
1 / 7San Mateo
I was called out to see if I could get this customer need a little more room in his garage. I came up with a solution that required a new wall penetration and the installation of a MagVent.
1 / 7San Francisco
This was a full service job, which included a vent repair, vent termination install and a full vent cleaning. When I arrive the customer was complaining about long cycle times.
1 / 8Los Altos
A complete exhaust system was installed to replace the existing non-compliant setup that was causing dryer errors.
1 / 8San Francisco
Mike Redman completed a comprehensive dryer vent cleaning and inspection service for multiple commercial dryer units at this San Francisco multi-unit laundry facility.
1 / 5Redwood City
Our team recently completed a critical dryer exhaust system repair and upgrade at a residential property in Woodside, CA.
1 / 8Burlingame
This customer called because their dryer was not dryer properly. Upon inspection there turned out to be three issues 1. the transition duct was not installed correctly. 2.
1 / 5Hillsborough
I was called because the dryer was taking multiple cycles to dryer. Upon inspection it turns our that the transition duct was too long, which is very common as it hard to get the dryer correctly…
1 / 5San Mateo
This was a fire/code compliance project we took on recently in San Mateo, CA. The home purchased a new dryer and upon delivery the dryer would not fit correctly into the existing space.
Where we've worked
Locations are approximate — pins are rounded to roughly a half-mile to protect each customer's privacy.
