MagVent Upgrade
MagVent, with its powerful self-aligning magnets, helps you remotely complete the dryer vent path so you no longer have to get between the dryer and the wall. This allows you to do away with that extra length of dryer vent hose which usually gets crushed and restricted between the dryer and the wall. Get your MagVent today and see why it is the best dryer vent replacement.
Starting at
$197 / ea
Final pricing depends on scope. We always quote before we start.
- Licensed & insured
- Same‑day quotes
- 100% guarantee
- Top rated locally
Serving 30 cities • see service area
MagVent Upgrade in San Mateo, CA
MagVent, with its powerful self-aligning magnets, helps you remotely complete the dryer vent path so you no longer have to get between the dryer and the wall. This allows you to do away with that extra length of dryer vent hose which usually gets crushed and restricted between the dryer and the wall. Get your MagVent today and see why it is the best dryer vent replacement.
Service area
Available in 30 cities
Related
You might also need
Resources
Helpful guides
Answers to the questions San Mateo homeowners ask us most.
Need MagVent Upgrade? We can help.
References & standards
“Exhaust ducts shall be supported at intervals not to exceed 12 feet (3658 mm) and shall be secured in place. The insert end of the duct shall extend into the adjoining duct or fitting in the direction of airflow. Exhaust duct joints shall be sealed in accordance with Section M1601.4.1 and shall be mechanically fastened. Ducts shall not be joined with screws or similar fasteners that protrude more than 1/8 inch (3.2 mm) into the inside of the duct.”IRC M1502.4.2
- IRC M1502.4.2 - Duct Installation Requirements - Duct joints must be sealed with metal tape, supported so they cannot sag, and fastened with screws short enough that nothing pokes into the airflow to snag lint.
- IRC M1502.4.3 - Transition Duct Requirements - The flexible duct behind the dryer must be a single piece no longer than 8 feet, rated for dryer use (UL 2158A), and never hidden inside a wall.
- IRC M1502.4.8 - Exhaust Duct Required When Space Provided - Any home with a space for a dryer must have a vent duct installed, capped and labeled for future use if no dryer is in place yet.